Ceramic Chain Lube and Multi-Purpose Spray Lubricant
Ceramic Chain Lube is a specialized adhesive lubricant ideal for rollers, chains, worm gears, open bearings, and all other open surfaces that require lubrication. Being transparent, it is ideal for sliding racks/doors, door locks, hinges and other areas where a colored lubricant is undesirable. Resistant to high loads and temperatures it prevents wear and corrosion by protecting against water, salt water, and temperature changes. Unlike most spray lubricants, Ceramic Chain Lube has excellent adhesion and does not run off! The ceramic technology ensures a maximum level of wear protection. Before Use: Make sure the can is at room temperature. Shake well for approx. 30 seconds, spray from a distance of 25-30 cm (12 inches). If applying several coats, allow each coat to dry for 1-2 minutes before applying the next one. After use turn the can upside down and clean the nozzle.
Extremely flammable. Causes skin irritation. Toxic to aquatic organisms, may cause long-term damage to aquatic environments. Avoid emitting directly into the environment. Vapors may cause drowsiness and dizziness. Use only in well-ventilated areas. DO NOT empty into drains. Keep out of the reach of children. Pressurized container: avoid storing in sunlight, do not expose to temperatures exceeding 50⁰C (125⁰F) DO NOT PIERCE OR BURN EVEN AFTER USE. Do not spray near lights or open flames. Keep away from all ignition sources. DO NOT smoke while using! Refer to special instructions/safety data (MSDS) sheets.